NKC Electronics

NKC Electronics Support, Project and Discussion Forums
It is currently Wed Apr 25, 2018 1:56 am

All times are UTC - 5 hours

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Introduction
PostPosted: Sat Jun 30, 2012 11:43 pm 

Joined: Thu Sep 08, 2011 9:59 pm
Posts: 71

The Digilent Electronics Explorer board (EE board) includes all of the test and measurement equipment needed to design and test analog and digital circuits of all types.

Built around a large solderless breadboard, the EE board includes oscilloscopes, waveform generators, power supplies, voltmeters, reference voltage generators, and thirty-two digital signals that can be configured as a logic analyzer, pattern generator, or any one of several static digital I/O devices. All of these instruments can be connected to circuits built on the solderless breadboards using simple jumper wires.

Designed for daily use and intended for every student to own, the EE board combines everything needed to design and test circuits in a single "all in one" device. Even in introductory classes, students can complete, test, and analyze real circuit designs as a part of every homework assignment. No more once a week labs; now every student can complete designs in virtually any setting - any residence can be a complete, 24-hour design studio!

The EE board is powered by the free, PC-based WaveForms™ software that makes it easy to acquire, store, analyze, produce and reuse analog and digital signals. WaveForms™ runs well on virtually any notebook PC, including low-cost Netbooks. A high-speed USB2 connection ensures all EE board instruments respond in near real-time.

WaveForms™ data files are stored using standard formats, making it easy to share data between instruments, and to export data to word processors or graphics editors. This means well documented student lab/project reports can be completed using standard office tools, and submitted electronically.

Real Analog
A complete, integrated set of lecture & lab materials to accompany your EE board.

The EE board ships a power supply, a USB cable, and the "Starter Analog Parts Kit". This kit contains an assortment of analog parts so you can start building and testing circuits right out of the box. The kit includes:

    1 Resistor 10Ω 1/4W
    1 Resistor 50Ω 1W
    2 Resistor 100Ω 1/4W
    2 Resistor 1K 1/4W
    1 Resistor 1.5K 1/4W
    2 Resistor 2K 1/4W
    2 Resistor 5.1K 1/4W
    2 Resistor 6.8K 1/4W
    10 Resistor 10K 1/4W
    10 Resistor 20K 1/4W
    2 Capacitor 100pF
    2 Capacitor 0.01µF
    2 Capacitor 0.1µF
    2 Capacitor 1µF
    1 Capacitor 4.7nF
    1 Capacitor 22µF
    1 Inductor 1mH
    1 Diode IN4001
    1 LED Red T1-¾
    1 Transistor NPN 40V 200mA
    1 Transistor PNP 40V 200mA
    1 MOSFET N-CH 60V 200mA
    1 IC-7seg drv CD4511
    1 IC-OpAmp TCA0372
    1 IC-Inverter 74HC14
    1 IC-NAND 74HC00
    1 IC-OpAmp RC4558
    1 Speaker 8140
    Pre-trimmed jumper wires
    Note: Some of these parts may occasionally be substituted for equivalents, due to changing availability.

Product link: http://store.nkcelectronics.com/Digilent-Electronics-Explorer_p_367.html

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group